精 慧 企 業 有 限 公 司

 

CEILING(PLUG OR SCREW ON) SENSOR FOR INDOORS        
               AC100V~AC240V(天花板開孔:8CM)
 ※採購AC277專用電壓(AC200V~AC300V)可客製式接單, 感應器須另付工本製作費※
 (1)RP-701崁入/吸頂感應器(室內)AC100V~AC240V

(2)RS-701崁入/吸頂接點感應器(室內) AC100V~AC240V

(4)RP-712/RS-712崁入/吸頂感應器(室內) DC12 V

(5)RP-701D/RS-701D崁入/吸頂雙頭感應器(室內)AC100V~AC240V

RP-701/RP-701D崁入/吸頂感應(電源式)

安裝法: 黑線接燈具(不帶電)，白線接主電源(插座)

＊BLACK COLOUR WIRE CONNECTED WITH THE WIRE OF LIGHT OR EXHAUST FAN 

＊WHITE COLOUR WIRE CONNECTED WITH THE POWER SOURCE                              

RS-701/RS701D崁入/吸頂感應(接點式)CEILING SENSOR FOR INDOORS

規格/安裝法:   適用於公共走道,逃生樓梯間,屋內走廊,以及閣樓等處

1.      線接主電源2. N.C為常閉接點(綠線)3. N.O為常開接點(黃線) 4. COM為共同接點(藍線)

(a)N.C不用 (b)"SWITCH OFF"為自動控制(c)"SWITCH ON"為常亮/燈具狀態,以手動控制

(上述三點為繼電器輸出接點均無輸出電源開放予使用者安裝)

WHITE COLOUR WIRE CONNECTED WITH THE POWER SOURCE

接點式燈具控制安裝法:如同開/關(SWITCH ON/OFF)

1.照明延遲時間長短(TIME): 5秒 ~15分 2.日夜(LITE): 可選擇24小時感應或只有晚上感應 3.開關”ON”時燈具保持常亮”AUTO”時紅外線感應 4.電源: AC100V ~ 240V, RP701/RP-701D/8A. RS-701/RS-701D接點/5A 5.感應範圍: 正面8-10 公尺, 左右各4公尺 ,前後各3公尺 6. 一組感應器可接多盞燈具電源端/負載端可不分極性, 注意AC110V/AC220V負載

8.若人次過多時,測試OK後,請調長延遲時間,如公共走道約1.5~3分鐘…

  FOR THE CONTROL OF LIGHT: SWITCH ON/OFF

(a)N.C(NORMAL CLOSED)(b) N.O(NORMAL OPENED)(c)COM(COMMUMION JOINT)

THE OUTPUT OF RELAY PIN WHICH WILL BE NO POWER OUTPUT

AND JUST FOR 3 POINTS USAGE.

1. SET THE SWITCH TO "OFF" POSITION, SENSOR IN DETECTION AUTO.

2.SET THE SWITCH TO "ON" POSITION，THE LAMP IN LIGHTING CONDITION

3.THE “LITE”: ADJUSTABLE, 24 HOURS OR ONLY IN DARKNESS

4.THE “TIME”: ADJUSTABLE, FROM 5 SECONDS TO 15 MINUTES

5.THE “SENSOR”: ADJUSTABLE.    4.POWER: AC100V ~ AC240V 

6.MAX LOAD: RP-701: AC110V/500W, AC220/1000W，RS-701: C JOINT/5A

7.DETECTING RANGE: 8 –10 METERS, DETECTING ANGLE: 145

8.SIZE: 10x3.1CM

                                 精慧MADE IN TAIWAN