RS-701崁入/吸顶两用感应(接点)
CEILING(PLUG OR SCREW ON) SENSOR FOR INDOORS
AC100V~AC240V(天花板开孔:8CM)
※采购AC277专用电压(AC200V~AC300V)可客制式接单, 感应器须另付工本制作费※
(1)RP-701崁入/吸顶感应器(室内)AC100V~AC240V
(2)RS-701崁入/吸顶接点感应器(室内) AC100V~AC240V
(4)RP-712/RS-712崁入/吸顶感应器(室内) DC12 V
(5)RP-701D/RS-701D崁入/吸顶双头感应器(室内)AC100V~AC240V
RP-701/RP-701D崁入/吸顶感应(电源式)
安装法: 黑线接灯具(不带电)，白线接主电源(插座)
＊BLACK COLOUR WIRE CONNECTED WITH THE WIRE OF LIGHT OR EXHAUST FAN
＊WHITE COLOUR WIRE CONNECTED WITH THE POWER SOURCE
RS-701/RS701D崁入/吸顶感应(接点式)CEILING SENSOR FOR INDOORS
规格/安装法: 适用於公共走道,逃生楼梯间,屋内走廊,以及阁楼等处1. 线接主电源2. N.C为常闭接点(绿线)3. N.O为常开接点(黄线) 4. COM为共同接点(蓝线)
(a)N.C不用 (b)"SWITCH OFF"为自动控制(c)"SWITCH ON"为常亮/灯具状态,以手动控制
(上述三点为继电器输出接点均无输出电源开放予使用者安装)
WHITE COLOUR WIRE CONNECTED WITH THE POWER SOURCE
接点式灯具控制安装法:如同开/关(SWITCH ON/OFF)
1.照明延迟时间长短(TIME): 5秒 ~15分 2.日夜(LITE): 可选择24小时感应或只有晚上感应 3.开关”ON”时灯具保持常亮”AUTO”时红外线感应 4.电源: AC100V ~ 240V, RP701/RP-701D/8A. RS-701/RS-701D接点/5A 5.感应范围: 正面8-10 公尺, 左右各4公尺 ,前后各3公尺 6. 一组感应器可接多盏灯具电源端/负载端可不分极性, 注意AC110V/AC220V负载8.若人次过多时,测试OK后,请调长延迟时间,如公共走道约1.5~3分钟…
FOR THE CONTROL OF LIGHT: SWITCH ON/OFF
(a)N.C(NORMAL CLOSED)(b) N.O(NORMAL OPENED)(c)COM(COMMUMION JOINT)
THE OUTPUT OF RELAY PIN WHICH WILL BE NO POWER OUTPUT
AND JUST FOR 3 POINTS USAGE.
1. SET THE SWITCH TO "OFF" POSITION, SENSOR IN DETECTION AUTO.
2.SET THE SWITCH TO "ON" POSITION，THE LAMP IN LIGHTING CONDITION
3.THE “LITE”: ADJUSTABLE, 24 HOURS OR ONLY IN DARKNESS
4.THE “TIME”: ADJUSTABLE, FROM 5 SECONDS TO 15 MINUTES
5.THE “SENSOR”: ADJUSTABLE. 4.POWER: AC100V ~ AC240V
6.MAX LOAD: RP-701: AC110V/500W, AC220/1000W，RS-701: C JOINT/5A
7.DETECTING RANGE: 8 –10 METERS, DETECTING ANGLE: 145
8.SIZE: 10x3.1CM
精慧MADE IN TAIWAN
